Four Christmas Crochet Ornaments
Make a coordinated set of bear, penguin, bunny and snowman baubles. Each has a stuffed round head, an embroidered collar, a small hat and a ribbon hanger. The sample ornaments measure about 8.5 cm (3.3 in) tall with the hat.
Start the step reader Full written pattern ↓

Before you begin
Work the heads and most small parts in continuous spirals unless a round explicitly joins with a slip stitch. Mark the start of each round. Keep stitches tight enough that the stuffing does not show. The head starts in one color, changes at R6, and leaves the front loops of R5 available for the collar.
Safety eyes can be a choking hazard. For ornaments accessible to young children, use embroidered eyes instead and secure the ribbon loop firmly.
Follow the ornament steps
Use Next and Previous to choose a character. The full round-by-round pattern is below each summary.
STEP 1 OF 4
Bear
Dark blue base, white head, white muzzle and ears, dark blue collar, light blue pompom hat.

STEP 2 OF 4
Penguin
Light blue base, dark blue head, white eye patches, yellow beak and a light blue top hat.

STEP 3 OF 4
Bunny
White base, light blue head, white muzzle, layered ears and a dark blue pompom hat.

STEP 4 OF 4
Snowman
Light blue base, white head, orange nose and a dark blue top hat.

Materials, gauge and abbreviations
2.0 mm (B) hook; cotton yarn in white (about 30 g / 96 m / 90 yd), light blue (about 20 g / 64 m / 60 yd) and dark blue (about 20 g / 64 m / 60 yd); small amounts of black, yellow, orange and soft pink yarn; fiberfill; four pairs of 8 mm safety eyes; tapestry needle; ribbon for hangers; optional stitch markers and pins. The sample used half-cotton yarn. A different yarn and suitable hook will change the finished size. There is no fixed gauge; aim for a dense fabric.
US terms: MR = magic ring; ch = chain; sc = single crochet; sl st = slip stitch; hdc = half double crochet; dc = double crochet; inc = 2 sc in one stitch; sc2tog = single crochet decrease; BLO = back loops only; FLO = front loops only. Parentheses with × indicate repeats; final parentheses give the round stitch count. Colors A = white, B = dark blue, C = light blue.
White pompoms: Wind yarn densely around a fork, tie firmly across the center, cut both loops and trim into a ball. Make one for the bear and one for the bunny.
Shared 23-round head shape
Use this sequence once for each ornament. The starting and second colors, eye positions, and face details are specified in the character sections below.
R2: 6 inc (12)
R3: (1 sc, 1 inc) × 6 (18)
R4: (2 sc, 1 inc) × 6 (24)
R5: (3 sc, 1 inc) × 6 (30)
Change to the second color.
R6: In back loops only, (4 sc, 1 inc) × 6 (36)
R7: (5 sc, 1 inc) × 6 (42)
R8: (6 sc, 1 inc) × 6 (48)
R9–16: 48 sc in each round (48)
R17: (6 sc, 1 sc2tog) × 6 (42)
R18: (5 sc, 1 sc2tog) × 6 (36)
R19: (4 sc, 1 sc2tog) × 6 (30)
R20: (3 sc, 1 sc2tog) × 6 (24)
Place the eyes as specified for this character. Stuff the head.
R21: (2 sc, 1 sc2tog) × 6 (18)
R22: (1 sc, 1 sc2tog) × 6 (12)
Add stuffing if needed.
R23: 6 sc2tog (6). Pull the opening closed, fasten off and hide the end.
Shared three-round collar
Use this sequence for all four collars, changing the yarn and zigzag color as specified for each character.

R1: ch 2, (4 dc, 2 dc in next stitch) × 6; sl st into the second starting chain (36)
R2: ch 2, (5 dc, 2 dc in next stitch) × 6; sl st into the second starting chain (42)
R3: ch 2, 42 dc; sl st into the second starting chain (42)
Fasten off, hide the end and turn the collar outward. Embroider a continuous zigzag across its last round in the stated contrasting color.
Bear ornament

Head: Begin shared head R1–5 in B (dark blue); change to A (white) for R6–23. Position 8 mm eyes between R12 and R13, 9 sc apart, before closing.
White muzzle
R2: ch 2, 2 dc in each stitch around; sl st into the second starting chain (24)
Fasten off with a long tail. Sew the muzzle around its perimeter between the eyes across head R6–14. Embroider a black nose near the top of muzzle R2, about 1 dc high, 2 stitches wide at the bottom and 4 at the top.
White ears (make 2)
R2: 6 inc (12)
R3–5: 12 sc in each round (12)
Flatten each ear, leave a long sewing tail and attach symmetrically across head R15–20.
Dark blue collar and light blue hat
Make the shared collar in B; embroider its last round in A. For the hat, use C:
R2: 6 inc (12)
R3: (1 sc, 1 inc) × 6 (18)
R4–7: 18 sc in each round (18)
R8: ch 1, 18 dc around; sl st into the starting chain (18)
Fasten off with a sewing tail. Turn the last round outward, attach a white pompom, stuff the hat lightly and sew it to the top of the head. Attach a ribbon loop at the top.
Penguin ornament

Head: Begin shared head R1–5 in C (light blue); change to B (dark blue) for R6–23.
White eye patches (make 2)

R2: 2 sc, 1 hdc, (2 dc in next stitch) × 3, 1 hdc, 2 sc, 3 inc (18)
R3: 2 sc, 1 hdc, (2 dc in next stitch) × 7, 1 hdc, 2 sc, (1 inc, 1 sc) × 2, 1 inc (28)
Sl st, fasten off and leave long tails. Insert each safety eye at the fourth chain stitch from patch R1. Place the eyes through the head between R11 and R12, about 8 sc apart, with the patches touching centrally. Stuff and finish the head, then sew patches around their edges across head R6–17.
Collar and yellow beak
Make the shared collar in C, then embroider A zigzags.
R2: 10 sc (10)
R3: (4 sc, 1 inc) × 2 (12)
R4: 12 sc (12)
Fasten off with a sewing tail and attach between the eyes, slightly below their center.
Light blue top hat
R2: 6 inc (12)
R3: (1 sc, 1 inc) × 6 (18)
R4: (2 sc, 1 inc) × 6 (24)
R5: In back loops only, 24 sc (24)
R6–7: 24 sc in C in each round (24)
Change to A. R8–9: 24 sc in each round (24)
Change to C. R10: In front loops only, ch 1, (1 dc, 2 dc in next stitch) × 12; sl st into the starting chain (36)
Fasten off with a long sewing tail. Embroider a B zigzag across R8–9, lightly stuff the hat, sew it to the head and add a ribbon hanger.
Bunny ornament

Head: Begin shared head R1–5 in A (white); change to C (light blue) for R6–23. Place eyes between R12 and R13, 9 sc apart.
White muzzle
R2: ch 2, 2 dc in each stitch around; sl st into the second starting chain (24)
Sew between the eyes across head R6–14. Embroider a soft pink nose near the top of muzzle R2, about 1 dc high, 2 stitches wide below and 4 above; extend a line to the center of the muzzle.
Layered ears (make 2 pairs)

R1 of each piece: ch 11; sc in second chain and the next 4 chains, 3 hdc, 1 dc, 5 dc in last chain; turn around chain, 1 dc, 3 hdc, 5 sc, sl st (23)
Fasten and hide the yarn end of the A piece. Do not fasten off the C piece. Ch 1 and turn. Put wrong sides together, inner to inner, and work through both layers around the edge: 10 sc, 3 inc, 10 sc, sl st.
Fasten off with a long tail. Sew ears symmetrically across head R18–20.
White collar and dark blue hat
Make the shared collar in A and embroider its last round in B. Work the short hat sequence in B, attach the white pompom, stuff lightly, sew to the head and add a ribbon loop.
R2: 6 inc (12)
R3: (1 sc, 1 inc) × 6 (18)
R4–7: 18 sc in each round (18)
R8: ch 1, 18 dc around; sl st into the starting chain (18)
Fasten off with a sewing tail. Turn the last round outward, attach a white pompom, stuff the hat lightly and sew it to the top of the head. Attach a ribbon loop at the top.
Snowman ornament

Head: Begin shared head R1–5 in C (light blue); change to A (white) for R6–23. Place eyes between R11 and R12, 10 sc apart.
Collar and orange nose
Make the shared collar in C, then embroider A zigzags.

R2: (1 sc, 1 inc) × 3 (9)
R3–6: 9 sc in each round (9)
R7: 4 hdc, sl st; stop this round here
Fasten off with a long tail and lightly stuff. Treat R7 as the lower edge and sew the nose across head R9–12, centered between the eyes. Embroider thin black brows.
Dark blue top hat
R2: 6 inc (12)
R3: (1 sc, 1 inc) × 6 (18)
R4: (2 sc, 1 inc) × 6 (24)
R5: In back loops only, 24 sc (24)
R6–9: 24 sc in each round (24)
R10: In front loops only, ch 1, (1 dc, 2 dc in next stitch) × 12; sl st into the starting chain (36)
Fasten off with a long sewing tail. Embroider an A zigzag across hat R8–9. Lightly stuff, sew to the head and add a ribbon hanger.
Finishing checklist
Check that every collar is turned outward, the facial pieces are sewn securely, both pompom hats sit firmly and all four ribbon hangers are anchored. Trim the pompoms and weave in remaining ends. The bear, penguin, bunny and snowman can be displayed individually or as a matching ornament set.

Leave a Reply