Red Panda Crochet Pattern | Plush Amigurumi with Striped Tail

Finished plush red panda crochet toy with cream face and striped tail

Amigurumi & Toys

Red Panda Crochet Pattern

Make a plush red panda with a cream muzzle, two-tone ears, dark paws and a striped tail. The original sample measures approximately 16.5 cm (6.5 in) with plush yarn and a 4 mm hook.

16.5 cm samplePlush yarn4 mm hookUS crochet terms

Start the step reader Full written pattern

Finished plush red panda crochet toy with cream face and striped tail
Finished red panda.

Before you begin

This amigurumi is worked in continuous spirals. Mark the first stitch of each round. Use tight stitches, make invisible decreases, and change color before completing the last stitch in the old color. Stuff as instructed while shaping the body, head and tail.

Follow the Red Panda Steps

Use Next and Previous to read the project in order. Each step links to its full round-by-round instructions below.

STEP 1 OF 5

Head and color changes

Start with cream in a magic ring and build from 6 to 34 stitches by R5. Switch between cream and brown in the stated order to form the muzzle and eye patches. Continue through R12 and place the 12 mm eyes between R4 and R5, 7 stitches apart.

View the full written rounds ↓

Red panda crocheted head with white muzzle
The head after its cream and brown color changes.

STEP 2 OF 5

Close and shape the head

Work the decrease rounds R13–18 from 40 to 12 stitches. Start stuffing at R16, finish firmly after R18, and close through the front loops. Embroider the two-stitch-wide nose across R1–2 and shape the face with a needle.

View the full written rounds ↓

Finished red panda face with stitched nose
Check the finished nose and cheek shape.

STEP 3 OF 5

Make and attach two ears

Work each dark brown and cream ear from 4 stitches in R1 to 20 in R5. Sew the open edges together and attach them across head R10–12, with 7 stitches between the ears.

View the full written rounds ↓

Red panda ear showing cream inner section and brown outer edge
Two-color ear detail.

STEP 4 OF 5

Body and back paws

Chain 9 and work around both sides to make the oval body base. Form two chain-6 openings in body R5. Join dark brown yarn at each opening for a 14-stitch back paw, then close with 7 decreases. Continue the color sections and body shaping through R22.

View the full written rounds ↓

Red panda body and striped tail in original pattern photo
Body color placement and tail.

STEP 5 OF 5

Front paws, tail and assembly

Divide the 32 stitches of R22 into two 15-stitch front paws with the center and back gaps. Work R23–26 for each paw. Make the striped 15-round tail, stuff it, then sew it to body R3–5. Sew the head securely to the body.

View the full written rounds ↓

Finished red panda amigurumi with striped tail
Completed red panda.
1 / 5

Materials, size and stitches

Size 5/6 plush, velvet or chenille yarn, approximately 120 m (131 yd) in cream, teddy-bear brown and chocolate/dark brown; 4 mm hook; two 12 mm safety eyes; fiberfill; tapestry needle; sewing pins; stitch marker; scissors; dark brown cotton yarn for the embroidered nose. Finished sample: approximately 16.5 cm (6.5 in). No separate gauge is given.

US terms: MR = magic ring; ch = chain; sc = single crochet (yarn under); inc = two sc in one stitch; dec = invisible single crochet decrease. Parentheses show the stated stitch count at the end of a round. Color labels apply until the next change.

Head

Brown and cream crocheted red panda head
Color placement on the head.
HEAD — begin in cream; work in a continuous spiral using yarn under
R1: 6 sc in MR (6)
R2: 6 inc (12)
R3: 1 sc, (1 sc, 1 inc) × 2, 2 sc, (1 inc, 1 sc) × 2, 1 sc (16)
R4: (cream) 3 sc, 1 inc; (brown) 2 sc, 1 inc; (cream) 2 sc; (brown) 1 inc, 2 sc; (cream) 1 inc, 3 sc (20)
R5: (cream) 3 sc; (brown) 5 inc; (cream) 1 inc; (brown) 2 inc; (cream) 1 inc; (brown) 5 inc; (cream) 3 sc (34)
R6: (cream) 4 sc, (1 inc, 1 sc) × 3; (brown) 1 inc, 1 sc, 1 inc; (cream) 1 sc, 1 inc; (brown) (1 sc, 1 inc) × 2; (cream) 1 sc, 1 inc; (brown) (1 sc, 1 inc) × 2; (cream) (1 sc, 1 inc) × 3, 3 sc (48)
R7: (cream) 3 sc; (brown) 45 sc (48)
R8: (brown) 42 sc, 1 dec, 4 sc (47). Cut the cream yarn.
R9: 5 sc, 1 dec, 35 sc, 1 dec, 3 sc (45)
R10: 4 sc, 1 dec, 39 sc (44)
R11–12: 44 sc in each round (44)
Place the 12 mm safety eyes between R4 and R5, 7 stitches apart. The first eye is placed after 6 stitches counted from the start of the round.
R13: 5 sc, (1 dec, 9 sc) × 3, 1 dec, 4 sc (40)
R14: (6 sc, 1 dec) × 5 (35)
R15: (5 sc, 1 dec) × 5 (30)
R16: (3 sc, 1 dec) × 6 (24). Start stuffing.
R17: (2 sc, 1 dec) × 6 (18)
R18: (1 sc, 1 dec) × 6 (12). Stuff firmly, fasten off with a long tail and close through the front loops.

Ears

Red panda ear placement against the head
Position both ears before sewing.
EARS — make 2; begin in dark brown
R1: 4 sc in MR (4)
R2: (dark brown) 2 inc; (cream) 2 inc (8)
R3: (dark brown) (1 sc, 1 inc) × 2; (cream) (1 sc, 1 inc) × 2 (12)
R4: (dark brown) (1 sc, 1 inc, 1 sc) × 2; (cream) 1 sc, 1 inc; (dark brown) 2 sc; (cream) 1 inc, 1 sc (16)
R5: (dark brown) (3 sc, 1 inc) × 2; (cream) 3 sc; (dark brown) 1 inc, 2 sc; (cream) 1 sc, 1 inc (20)
Cut the cream yarn and hide its end. Leave a long dark brown tail. Sew the open sides together. Attach the ears to head R10–12, with 7 stitches between them.

Body and back paws

Red panda plush body seen from behind
Body shape and color transitions.
BODY — begin in brown; chain 9 and work around both sides of the chain from the second chain from the hook
R1: 1 inc, 6 sc, 4 sc in the last chain; on the opposite side 6 sc, 1 inc (20)
R2: 2 inc, 6 sc, 4 inc, 6 sc, 2 inc (28)
R3: (1 sc, 1 inc) × 2, 6 sc, (1 sc, 1 inc) × 4, 6 sc, (1 sc, 1 inc) × 2 (36)
R4: (2 sc, 1 inc) × 2, 6 sc, (2 sc, 1 inc) × 4, 6 sc, (2 sc, 1 inc) × 2 (44)
R5: 1 sc, ch 6, skip 6, 9 sc, ch 6, skip 6, 22 sc (44)
R6–7: (dark brown) 23 sc; (brown) 21 sc in each round (44)
R8: (dark brown) 24 sc; (brown) (2 sc, 1 inc, 2 sc) × 4 (48)

BACK PAWS — join dark brown at the last stitches before a chain-6 opening from R5, ch 1. Work R1–3: 14 sc in each round (14); R4: 7 dec (7). Fasten off and close. Repeat for the other opening.

Continue the body:
R9: (dark brown) 1 sc, (1 dec, 2 sc) × 2, 7 sc, (1 dec, 2 sc) × 2; (brown) 24 sc (44)
R10: (dark brown) 1 sc, 2 dec, 9 sc, 2 dec, 2 sc; (brown) 24 sc (40)
R11: (dark brown) 16 sc; (brown) (2 sc, 1 dec, 2 sc) × 4 (36)
R12: (dark brown) 16 sc; (brown) 20 sc (36)
R13: (dark brown) 16 sc; (brown) 2 sc, (1 dec, 3 sc) × 3, 1 dec, 1 sc (32)
R14: (dark brown) 16 sc; (brown) 16 sc (32)
R15: (dark brown) 17 sc; (brown) 15 sc (32)
R16: (dark brown) 18 sc; (brown) 13 sc; (dark brown) 1 sc (32)
R17: (dark brown) 20 sc; (brown) 10 sc; (dark brown) 2 sc (32)
R18: (dark brown) 22 sc; (brown) 7 sc; (dark brown) 3 sc (32). Cut brown.
R19–22: 32 sc in dark brown in each round (32).

Front paws

FRONT PAWS — do not overstuff. Divide the 32 stitches of body R22 into 15 stitches for each paw, 1 center gap stitch and 1 stitch at the back. From the beginning of R22 skip 10 stitches to attach the first marker, then skip 15 stitches to attach the second marker.
In dark brown, work each paw separately:
R23–25: 15 sc in each round (15)
R26: (1 sc, 1 dec) × 5 (10)
For the second paw, join fresh dark brown yarn at the second marker, ch 1, and repeat R23–26. Fasten off each paw and close through the front loops.

Striped tail

Striped brown red panda crochet tail beside body
Tail before attachment.
TAIL — begin in dark brown
R1: 6 sc in MR (6)
R2: 6 inc (12)
R3: (1 sc, 1 inc) × 6 (18)
R4: (2 sc, 1 inc) × 6 (24)
R5: 24 sc (24)
Change to brown. R6: 24 sc (24)
R7: 4 dec, 16 sc (20)
Change to dark brown. R8: 2 dec, 16 sc (18)
Change to brown. R9–10: 18 sc in each round (18)
Change to dark brown. R11: 8 sc, 1 dec, 2 sc, 1 dec, 4 sc (16)
Change to brown. R12: 16 sc (16)
R13: 8 sc, 2 dec, 4 sc (14)
Change to dark brown. R14: 14 sc (14). Stuff firmly.
Change to brown. R15: (5 sc, 1 dec) × 2 (12). Fasten off with a long sewing tail.

Face and finishing

Numbered needle positions 1 through 6 for shaping the crocheted face
Needle path shown on a contrast-color sample. Follow the numbered points on your red panda head. Tap to enlarge.
Red panda face showing embroidered nose
Nose and face shaping.
FACE AND ASSEMBLY
Embroider a dark brown nose across head R1–2, two stitches wide.
For the face shaping, mark the two center points between R7 and R8. Thread a needle and pass it through the shaping points in the order 1→2, 3→4, 1→5, and 6→4 as shown in the numbered guide above. Pull both ends firmly, tie and hide the ends. Check the eye and snout placement as you shape.
Sew the head to the body in a pose you like, using matching cotton thread and alternating one stitch from the head with one from the body until secure.
Sew the stuffed tail to the body between body R3 and R5. Weave in all ends and check that the ears and paws are firmly attached.

Comments

One response to “Red Panda Crochet Pattern | Plush Amigurumi with Striped Tail”

Leave a Reply

Your email address will not be published. Required fields are marked *